Compass 4G Advaned
The Compass 4G Advanced is the most feature-rich variant in the Compass Series, offering not only AIS 140 compliance but also Multiple CAN interface support for enhanced vehicle diagnostics and fleet management. It incorporates Driver Monitoring System (DMS) technology, enabling the detection of driver fatigue, distractions, and other behavioral concerns, ensuring a safer driving environment. With the advanced 4G connectivity, this variant provides the most versatile solution for businesses requiring advanced fleet tracking and driver safety features.
Learn more about Compass 4G Advanced
We bring the cutting-edge technology to you, through a collaborative approach.
Specifications
Power Supply
- Operating Voltage
8V-90V - Internal Battery
3.7V, 1000mAH; Li- po battery, (Battery can be replaceable with higher capacity) - Protection
Reverse Polarity Protection, Internal resettable fuse, TVS protection
CPU Core and Memory
- Cellular module
ARM, 32 bit, 1.2MB RAM, 836KB ROM, 1.5MB UFS - MCU
G3KH, 32-bit, 128 KB SRAM, 1MB Flash, 64KB Data flash - Non-Volatile Flash
32MB Flash
Cellular Module
- Modem
LTE Cat 1 Module - IoT connectivity
2G, 4G - Frequency
FDD LTE: B1/B3/B5/B8
TDD LTE: B34/B38/B39/B40/B41 - GSM
900/1800MHz - GPRS Class
Multi-slot, Class 12 - GPRS Mobile Station
Class B - GPRS Data
GPRS data downlink transfer: max. 85.6kbps
GPRS data uplink transfer: max. 85.6kbps - LTE Characteristics
LTE-FDD: Max. Downlink rate 10Mbps,the maximum uplink rate 5Mbps LTE-TDD: -Max.
Downlink rate 8.96Mbps, the maximum uplink rate 3.1Mbps - Output Power
Class 4 (2W) @ EGSM900 MHz
Class 1 (1W) @ DCS 1800 MHz
Class 3 for LTE-FDD
Class 3 for LTE-TDD - Coding Schemes
CS 1, 2, 3. 4 - SIM Card
1.8/3.3V Micro SIM (Optional) - Embedded SIM
eSIM/eUICC with M2FF package (Default for AIS-140) - Protocols
TCP/IP, HTTP,HTTPs, MQTT & SMS - GSM Antenna
Internal
GPS and GNSS Receiver
- Module
GNSS Module - GNSS Receiver
Multi-GNSS engine for GPS, IRNSS, GLONASS, Galileo and QZSS; - Frequency
GPS L1 Band Receiver (1575.42MHz)/
GLONASS L1 Band Receiver (1601.71MHz)/
IRNSS L5 Band Receiver (1176.45MHz) - Position Accuracy
<2.5m CEP - Reacquisition Time
<1s - Velocity Accuracy
Without Aid < 0.1m/s - Acceleration Accuracy
Without Aid < 0.1m/s2 - Timing Accuracy
1PPS out: 10ns - Hot Start
<2s, TTFF @-130dBm - Warm Start
<25s, TTFF @-130dBm; - Cold Start
<32s, TTFF @-130dBm; - Acquisition Sensitivity
-147dBm - Tracking Sensitivity
-163dBm - Reacquisition Sensitivity
-156dBm - Update Rate
1Hz (Default), configurable up to 10Hz - GPS Antenna
Internal Patch on Top Antenna
Dynamic Performance
- Maximum Altitude
Max. 18000m - Maximum Velocity
Max. 515m/s - Maximum Acceleration
4G
External Interfaces
- Digital Input
Four– 1 dedicated for Ignition. - Digital Output
Three – Support Open Drain, 120mA; resettable fuse protected. - Analog Input
Three – 0 – 10 Volts @12-bit resolution; Single ended; Multiplexed with digital input. - External Interfaces
1x RS232, 1x RS485 (Half duplex), 2x CAN2.0B, 1x CANFD, 1x 1-wire Protocol USB(debugging purpose).
RTC (Optional)
- RTC Battery life
1-2 years. - RTC Battery type
Replaceable 3V Lithium Coin Cell (CR1225).
Mechanical
- Dimensions (mm)
110mm x 95mm x 48mm (LxWxH)
- Enclosure
Polycarbonate
Electrical
- Digital Input Range
0-36V (Low and High threshold can be factory settable up on request) *one channel can be used for 0-90V range Optional) - Analog Input Range
Single Ended, 0-10V Configurable mode (Voage/Current loop) (Voltage range can be factory settable). - Digital Output Current
150mA Peak, Integrated load dump and free- wheeling diode for Relay or inductive load driving. - Sleep Mode Current :
≤ 3 mA @ 24V
≤ 5 mA @ 12V - Average Current
40mA @24V (Peak current=337mA during transmission)
70 mA @12V (Peak current=674mA during transmission)
WIFI-BLE Module
- Wi-Fi 6 module, single band Wi-Fi (2.4 GHz), 1 × 1 antenna
- LE 5.1 and Bluetooth pairing
- 240 MHz Cortex-M4F processor
- 512 KB SRAM and 4 MB/ 8 MB flash
- UART, SPI, I2C, I2S, ADC and PWM functions
- Complies with WPA-PSK, WPA2-PSK and WPA3 SAE security standards
Accelerometer
- High precision accelerometer with a gyroscope.
- Accelerometer shall be able to measure 3-axis with +/- 2g, +/- 4g, +/- 8g, +/- 16g measurement range.
- Gyroscope shall be able to detect the true rotation angles in all 3 directions.
- Configurable Harsh acceleration, Harsh breaking, Tilt angle, Tilt angle reference.
Product use cases
Transforming Automotive Industry with Safety, Compliance, Data & Remote ECU Management
Discover how we helped a prominent player in the automotive industry to meet compliance standards, ensure safety, manage fleet operations, and update vehicle ECUs in the dynamic telematics landscape.
Redefining Telematics in Global Farm Equipment Sector
Explore how we solved the challenge of a leading farm equipment company with our global GPS tracking system that helped to improve the performance, innovation, safety, efficiency, and data-driven decision-making.
Remote cold chain management
Discover how our comprehensive remote cold chain management solution monitors the cabin temperature, ambient temperature, compressor voltage, power status, power consumption, remote on/off, alerts, humidity, door status, and GPS location helping the diary manufacturer maintain the stability and durability of their products.
Transforming Battery Management for EV
Transight’s collaboration with this leading player in the EV industry revolutionized EV data handling. This approach significantly improved data collection, interpretation, and analysis, benefitting the entire EV sector, researchers, and service providers.
